Fender Heritage 60s Stratocaster CAR (Red)

Description

We have a pre-owned FENDER MADE IN JAPAN Heritage 60s Stratocaster CAR in stock!

Made in Japan in 2023.

It features a lacquer-finished alder body, maple neck, and rosewood fingerboard.

It’s equipped with three Premium Vintage-Style 60s Single-Coil Strat pickups. It features a 7.25-inch-radius Thick “C”-shaped maple neck and a six-saddle vintage-style Synchronized Tremolo bridge, all of which are vintage-style features.

While there are some minor scratches, dents, and tarnish on the metal parts, it’s in excellent condition for a pre-owned item.

It was cleaned and fully tuned upon arrival, and plays perfectly.

Product Rank: B+: Minor scratches, but no issues for normal use.

Warranty: 12 months

Serial Number: JD23001621

Year of Manufacture: 2023

Country of Manufacture: Japan

Case: Soft case

Accessories: Arm wrench

Weight: 3.35kg

Truss Rod: [No issues] Rod has been checked up to 60 degrees left and right and is in good condition

. Remaining Frets: [No issues] Ample fret height.

String Height (Bass): 2.0mm above the 12th fret

String Height (Treble): 1.5mm above the 12th fret

Nut Width: 40.7mm

Neck Thickness (near the 1st fret): 20.5mm

Neck Thickness (near the 12th fret): 24.6mm

Scale: 648mm (25.5″)

Radius: 184mm (7.25″)

Strings (as installed): ERNIE BALL 2221 / .010-.046 set

Repairs/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and nut groove adjustment.

*As this is a used item, there may be scratches, dents, and other damage that is difficult to see in photos, as well as other

damage not listed. Thank you for your understanding. *If any information is provided about the truss rod, remaining frets, string height, etc., these were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.

These numbers are intended as a reference when purchasing and cannot be guaranteed to be the same upon delivery